Trade Show Display Manufacturing & Custom Exhibit Solutions
A trade show booth has seconds to earn attention, and it still has to survive freight, a tight install window, and days of foot traffic. Next Level Displays, based in Brea, California, designs, builds, rents, ships, installs, and stores exhibits for companies exhibiting anywhere in the United States.
Design, CNC fabrication, construction, and printing happen in our 40,000-square-foot production house, and one dedicated project manager stays with your exhibit from kickoff to dismantle. Below, we explain how that works and how we support exhibitors across nine states.
Custom Trade Show Display Manufacturing and Design
A custom exhibit is built around one brand, one booth footprint, and one set of show goals instead of being adapted from a catalog kit. Layout, materials, graphics, lighting, and structure all follow the brief, so the booth reads clearly from the aisle and gives your team room for real conversations.
Every custom trade show exhibit starts with 3D renders and detailed spec drawings, so you can judge sightlines and traffic flow before a single panel is cut. Engineering then uses CAD modeling to confirm the exhibit is structurally sound and code-compliant.
For Arizona exhibitors comparing options for trade show display manufacturing, the practical advantage is accountability. Because we manufacture in-house, design, fabrication, freight, and installation sit with one team and one itemized quote instead of being passed between separate vendors.
Custom Exhibit Fabrication and Construction
Fabrication and construction are two different stages. Fabrication happens in the shop, where CNC routers and precision cutting tools turn approved designs into finished panels, millwork, and structural components in wood, metal, and acrylic. Construction is the assembly: building the structure, integrating lighting and AV, and following the approved drawings.
Keeping both stages in-house keeps materials, tolerances, and finishes consistent from the first prototype to the finished exhibit. Large-format printing for graphics, backlit panels, and fabric structures is handled in-house too, so the graphics match the structure. Our production manager, Hugo Hernandez, completed woodworking certification in 2017 and oversees fabrication on every project.
Our portfolio spans technology, aerospace, diagnostics, and consumer brands, including exhibits for Rocket Lab, JetBrains, Ark Diagnostics, and Tetra Pak. Browse the exhibit gallery or read our case studies.
Trade Show Booth Design Built Around Your Show Goals
Good booth design starts with the visitor, not the structure. Decide what a visitor should do first, then plan around it: a reception counter and demo stations for lead capture, display walls for product-heavy brands, or an enclosed meeting room when conversations need privacy.
Graphics, lighting, and AV work as one system. A backlit wall, a well-placed monitor, and a clear sightline from the aisle often matter more than extra square footage. We design everything from 10 x 10 inline exhibits to double-deck exhibits, and offer portable displays for smaller programs.
Evaluating trade show booth design in Ohio or any other market? Bring your show goals and booth size, and we will develop concepts around them.
Trade Show Display Installation, Dismantling, and Logistics
A well-built booth still fails if it arrives late or goes up wrong. Our nationwide installation and dismantle crews apply the same quality-control standards at every venue, and your project manager coordinates transportation, venue requirements, and show-site setup.
We also handle crating, freight, and storage between shows, plus show services covering logistics, technology, and on-site support. After the event, the exhibit is dismantled and stored or refurbished for next time.
Start early. We recommend opening the conversation three to four months before your show. A typical custom build takes 10 to 14 weeks from concept approval to crating, and rush builds of six to eight weeks may be possible. For trade show display installation in Washington or any other state, earlier planning widens your options.
Custom Exhibition Booth Rentals
Not every exhibitor needs to own a booth. Our custom rental exhibits go through the same design and fabrication process as owned builds; the difference is the ownership model. Rentals are customizable, resized to fit your space, and include shipping, installation, and dismantle.
Renting often makes sense when you are testing a new show, exhibiting infrequently, working on a short timeline, or trying a layout before committing to it. Teams researching exhibition booth rentals in Massachusetts can compare a rental with a full custom build and choose what fits their budget and show calendar.
Serving Exhibitors Across Arizona, Colorado, Pennsylvania, Ohio, Michigan, Washington, Massachusetts, New Jersey, and Maryland
Next Level Displays is headquartered in Brea, California. We do not operate offices or production facilities in these states. We design and manufacture at our production house, then support exhibitors nationwide through shipping and installation and dismantle crews. Here is how that applies in each market.
-
For trade show display manufacturing in Arizona, we build the exhibit in-house and ship it to Phoenix, Tucson, or wherever your show is, with one itemized quote covering design through dismantle.
-
Custom trade show exhibits in Colorado, including shows at the Colorado Convention Center in Denver, usually start with one decision: a full custom build or a custom rental. We help you weigh timeline, budget, and how often you will reuse the exhibit.
-
Searching for exhibition stand builders in Pennsylvania? We call them booths and exhibits, but the scope is the same: design, fabrication, freight, installation, and dismantle. Whether your show is at the Pennsylvania Convention Center in Philadelphia or elsewhere, your project manager coordinates venue requirements.
-
For shows in Columbus, Cincinnati, Cleveland, and beyond, our design team begins with 3D renders so you approve the look before fabrication starts.
-
Industrial and automotive brands are among the exhibitors we build for. Custom exhibit fabrication for Michigan shows uses the same in-house CNC, woodworking, metal, and acrylic shop described above.
-
From Seattle to Spokane, our nationwide crews handle installation and dismantle under the same quality standards we apply everywhere else.
-
Boston-area shows can be served with a custom rental or a purchased custom exhibit, either one managed end to end.
-
As trade show exhibit builders for New Jersey events, including the Meadowlands Exposition Center in Secaucus, we manage logistics and installation so your team arrives to a finished booth.
-
Custom exhibition booth construction for Maryland events, from Baltimore to National Harbor, follows the same engineered, code-compliant process we use on every build.
Why Choose Next Level Displays?
More than 20 years of trade show industry experience
500+ custom builds delivered, from single-story islands to double-deck exhibits
In-house design, engineering, fabrication, and printing
A dedicated project manager from kickoff to wrap
Nationwide installation and dismantle crews
Custom builds and rental options
Itemized quotes with no hidden charges
Storage, refurbishment, and post-show support
You are welcome to visit our facility and see design, engineering, fabrication, and printing under one roof.
Our Exhibit Design and Manufacturing Process
Consultation. We review your brand, goals, booth size, budget, and show requirements.
Concept and 3D design. Our designers develop concepts and renders aligned with your branding.
Approval and planning. We finalize layouts, complete engineering, and prepare the production plan.
Fabrication and production. Your exhibit is built with quality checks at each stage.
Logistics and setup. We manage crating, freight, venue coordination, and installation.
Dismantle and post-show support. We dismantle, then store or refurbish the exhibit.
Frequently Asked Questions
-
It is a booth designed and built for one company's brand, goals, and show space, rather than adapted from a pre-set catalog design.
-
Typically 10 to 14 weeks from concept approval to crating. Rush builds of six to eight weeks may be possible, so talk to us early.
-
Rent when you are testing a show, exhibiting rarely, or short on time. Build custom when you want to own the exhibit and reuse it.
-
Design renders, engineering, fabrication, graphics, lighting, AV integration, freight, installation, and dismantle, itemized in one quote.
-
Yes. You own every panel, fixture, and graphic, and we can store and refurbish the exhibit between shows.
-
Yes. We serve exhibitors across the USA with nationwide installation and dismantle crews.